Now the difficult bit/s........Electrics !!

So faithful fans,  I'm still at it albeit slowly due to lethargy, work and lack of finances.
I last left the car with the new ST spoiler loosely fitted and the Bumper bracket attached. The Brake master cylinder has been removed during the last attempt at seal replacement as it broke on the end so a new one is needed. I've had the cash for the replacement for some time but not the inclination to fit it.

The enormity of whats left to do has been nagging away at me for some time and often thought of packing it all in, especially since my daily hack the Peugeot 207 has developed an annoying limp home issue.

So today with 3 days off and a nice sunny day I set to to looking at the dash re-fitting and vynyl top re-glueing + crash pad. Bad move !!

The good news is I have finally removed the steering wheel after 2 years of trying. Damaged the nut and thread on column though, fortunately not much.

The bad news is that I've buggered the RH indicator mechanism, lost some small but vital parts and snapper one important part ( also tiny and un-fixable). That's another £30 part needed !!!
When will I ever learn the old motto.... " If it aint broke don't fix it !!"
I had a loose purple wire bullet connector (Male) adrift from somewhere on the underside of the stalk mechanism and needed the wheel off and said mechanism. As  I've said I've now done both but  could not resist taking the RH unit apart to see where/how/ why the female bullet connector was to affect a repair.
Hey Ho....another one for the experience bank.

I shall be extremely careful whit the electrics from now on.
I know from all those years back that at least 3 rocker switches disintegrated on removal, the heater pipes were impossible to undo and the dash a complete enigma to free one dark and snowy winter.

So maybe tomorrow I will investigate the dash bulbs and source some wrinkle finish paint to aid the enthusiasm drought. Wish me luck.

Not long Now ?

Just a quick post to let you know I'm not dead and still at the MG stuff.

Its taken me all of 2 hours to get onto the blog to put this post on, gawd I must be getting old.

I'm about to clear out the shed at the bottom of the garden soon and this means only one thing, its summertime....almost !

Since starting as a Radiographer proper a couple of years ago and on the "Rota" it leaves very little time to dedicate to my loved one, let alone having the cash.

However to get up to speed I'll tell you the following since the last post.

1/. Not much

2/. Ma in Laws 80th birthday soon, that means its been 10 years since I bought it and thought I better get it finished !

3/. The weather has been rubbish during winter so the first jobs will be cleaning off any rust and puddles accrued.

The engine runs, albeit a bit "tappetty", allthough I set the clearances I think its the timing chain/tensioner making the noise. Find the vid and have a listen, let me know your views.

The spoiler is fitted 80%, needs a full set of the correct screws and nuts and attention to the sidelight holes. During removal of the original valance half of the screws sheared , some came out OK some needed the nut behind grinding off.

So, I'm considering an engine bay tidy up, bodge fix on the heater radiator core and buying a new Master brake cylinder. The old one's been on and off so often to mess with the seals that I damaged the cast iron body whacking it against a wooden batten then in frustration a housebrick !

After they are sorted I'll fit the dash ( I'm sure there will be several posts regarding this subject) fit the window and seal mechanisms and maybe front and rear screens. Thats enogh to chew on for now. I'll post more when I actually do something, If good old blogger/google plus lets me back on !