just a little one

Post that is !

My office for today .....with executive chair.

Since it was a lovely sunny day, I had the day (FFFFFFFFFriday !!) off and had some energy after a lie in I thought I'd uncover the MG. Normally at this time of year some water has managed to creep in and flood the boot ( trunk) area. So, I fully expected to spent most of the day drying tools mopping up wet/rusty areas and having a good tidy up and re-arrange of all the tools and car parts.

Not so. Very little water ingress. There is a lot, and I mean a lot of little /medium/ large boxes of stuff that keeps on growing. I have an internal memory bank of what these are, where they came from and what I'm going to do with them....................someday !

Its over ten years since I started the project and think that the memory banks are now showing signs of failure.

For example, today's job was to weld the wheel arch inner outer inner patch. But could I find the templates I'd made last summer. It took an hour of searching the shed, outhouse, conservatory, boxes in the car, boxes out of the car, dining room x 3. After a well deserved lunch I found them. They were in a box right opposite the kitchen door and I'd walked passed about fourteen times that morning after the initial tidy-up.

The during welding the sparks start playing up as the nozzle was getting hot/damaged. Could I find spare nozzles ..............no, not , nyet, never. I do have some but could not be found in all the usual places ( conservatory desk drawer). Neither could I find the small needle files to open up the 0.6mm nozzle hole. 

So the upshot was the welding was rubbish. Not at all how i saw it in my head or envisioned how easy it looked.

Lo......crap welding,but my welding and its done !  Its never gonna be seen as it will be under sound proofing and carpet. Beneath will be treated to a good coating of under seal too.

 I am worried about the parts still in boxes though. For example, one box contains a front RH side brake disc,pin and spring plate, another lock mechanisms with window sliders and brackets (no screws) another fuel overflow pipes and wing screws and it goes on and on. Must crack on and get bolting things on. One source of frustration is all the screws and nuts and washers. So many different sizes and types.

Anyway, I finished the rear LH light aperture and filed the hole to allow the light base to fit

And here it is fitted. Well balanced in position anyway. Next up door glass and sliders, but that's for another day soon

Has it been that long ?

In a word yes..........9 months of not very much MG wise.

So let me fill you in a little on the last 12 months.
Both twins have left home properly, one to the environs of Birmingham to live with girlfriend but work in Coventry. The other to the northerly climes of Newcastle to live with her boyfriend and work Three, YES THREE jobs. Now her boyfriend has a Radiology post in the area they are looking at houses to buy.

I also have a new job. 20 yards down the corridor in Interventional Radiology. It has different hours . Four long days of 10 hours with a random midweek day off as well as weekends. And we  have to cover on-calls, roughly 2 days per month for 12 hours ( 24 hours at weekends). Not so bad.

Theirin lies the tale though. I've been so shattered midweek that I'm often in bed for 9pm, since my day starts at 6am. I love the job though and work with a great team, its complex but less stressful with less pain to the knees.  Even though I wear mi lead tabard most of the day, have a jcloth on mi head with green jimjams its fun. These hours were only changed weeks after I started so I'll have to see how it pans out for summer weekdays working on the car.

Some time before last Christmas uncle Bri visited and left me with more tools. A fantastic bench grinder with wire brush, Bosch grinder and a jigsaw with laser guide, wow. Just need a sander now.

For now, residing in the back of the car, together with all the other stuff that won't fit in the shed.

The future plans for the  Fufferfour household are new soffits and fascias, failed window glazing replaced, house re-wire, re-decoration and if any any dosh is left, a new shed.......whahoo.

 All due to the fact the mortgage is finished soon, as is my student loan and a salary increase come April.  

Wifey even admitted she would like me to have a big shed or garage. Methinks I will build my own garage after the aforementioned stuff is done. A new Larger shed will fit at the bottom of the garden where the existing 7x5, fit to bursting, resides. A nice 8 x 10 will do nicely. I might even re-locate the 7x5 near the house temporarily till it is no longer safe or weatherproof or in the way of a garage build.

This is the current state of the MG restoration. One last welding job to do ( never say never eh ?) on the rear LH inner wheel arch. I've cut the templates using CAD ( cardboard aided design) and was going to weld  up today but am just too tired after cutting the lawns and repotting a bush for wifey. Besides, it was too windy !

Normal view of my workshop

Additional storage box which has been very handy and only cost £30 from B&Q. Wish I got two.

So what next then ? This time of year ( traditionally spring Bank Hol in a few weeks time) sees me re-organise the conservatory outhouse mess, shed mess and car mess. Basically a 2 day job of re-arranging stuff and throwing away very little after swearing this year I'll be ruthless ( I could be if Wifey wasn't hovering by my shoulder all the time inspection everything).

I'm not that far off completion........really. Now I've decided that a vinyl wrap ( £600) may be the way to go instead of a full respray ( £2500) and a full interior is not required for the m.o.t.

So after the welding to the rear arch I'll fit the window mechanisms, winders and locks. I don't know why but I have 3 locks and 2  keys, neither work. F**k me, the locks are expensive , and here's me thinking I'd fit remote central locking easy peasy, and cheap second hand. I bet the mechanisms are going to be fiddly and the window channels even worse, let alone the door and seal alignments.

Next up will be the headlights, bulbs and rear lights, the the dash and windscreens/seals which is a part I'm dreading. So if I can get all that done this year I'll be a happy Fufferfour.

I must add the impetus for the resurgence is down to me watching a lot of YouTube videos. Namely The lovely George at "SOUP" whose restoring a Range Rover ( like me outside) and a fantastic Lotus Esprit. The quality of the production and editing is brilliant. Also a mention must go to Elin Yakovs "Rusty Beauties" who restored  a Triumph GT6 and TR6. Funny guy and a wizzard.

  TREASON ALERT..........I think I want a TR6 next !!!!!!!!      ooooooooooh Matron.

Now I can get photos from my phone onto this account and now know......and more importantly wrote down, the account name and password I should be able to do this more often....hopefully !

New beardyface Fufferfour enjoying Christmas with the kids

 


More soon