Quick update

Well, I ordered said replacement bushes ( Cheap from MGB hive - £ 2.95 ish) new bump stop pedestal ( £4.95, galvanised, a real bargain) & replacement rubber brake hose. They came at 8.00 am the following morning.
So, pleased with that I legged it to Halfords and bought a can of matt black brush on enamel and PENETRATING OIL ( funnily enough the product is made by WD40 brand..ha....It smells loverly, not the metallic sickly smell I remember)
My big dilemma was Halfords prices. £9 for spray on Hammerite Matte Black, £6 for own brand matte black spray, £ 7 for brush on hammerite and £4.75 own make. In a fit of economy I bought the cheapest, feeling guilty over my recent spending spree.
I've used it and am mildly disappointed. I should have bought the gloss. The parts look ok matt, but can't help thinking they would look much better gloss and be easier to clean in the future.
            The big plus point is I've fitted the bushes into the spring fronts.
It was easy peasy. This was the part I was dreading. I have no garage/workshop, few tools and am apt to rushing things. However, with the use of the trusty B&D workmate, oversize socket and lump hammer they went in easy.Well a few ( lots) of well aimed blows in they crept, seated and positioned correctly.
            Now it seems a shame to leave the axle and brake pipes all crusty with crud. Its not easy to get down & under to attack them in situ as well as the body underside.
So, I decided to remove the axle complete, wire brush with grinder then paint before fitting the fuel tank. Then replace the rear copper brake line.
In order to do this I have to disconnect the prop-shaft at the diff.
PROBLEM. 1/. The bolts have very short heads and the nuts don't allow to get a socket on them.
I've doused them liberally several times with penetrating oil.
PROBLEM 2/. the RH brake line came undone from the hub easy, the LH wont budge. The main problem is the fear of rounding out the flats on brake nut and diff nuts. Its only possible to get a tiny thin 1/2" spanner on them and that just spins.
So its a waiting game hoping the penetrating fluid does its stuff.

Hopefully the next post will see it all fitted and looking superdooper new like.

Onward and Inward or its spring time, literally !

Oh the joys of MG ownership.

After a long bout of thriftiness, I manage to save some money towards the rear suspension, So, from three different places I bought :-  set of Polybushes for rear spring shackles, lowering kit "u" bolts and spacers with attendant polybush covers, pair of chrome bumper shorter link arms and shorter rebound straps. That was a month or two ago. But being too cold to work outside, I decided to wait till the weather improved. I did have a half hearted attempt at removing the rear axle and springs. It was easy................ish. The "U" bolts nuts came away OK, so did the bottom end of the rear spring. The handbrake cable was a complete enigma on how to detatch. The rubber brake pipe mounted  from the battery box union bracket to the 3 way union on the axle would not budge, either end, so I left it be. The axle is supported on a trolley jack and the car on a stout timber 4x4 with 2 axle stands. Sounds a bit illogical but that's the way it is. The front end of the rear leaf spring would not budge, either side. Neither would one link arm come away from the Armstrong damper. After one mistake viz spraying liberally with WD40, they still would not budge. TECHNICAL NOTE . WD40 is not a releasing fluid, it a water dispersant. So if you need to "soak" nuts and bolts etc use PENETRATING FLUID, like Duck oil or whatever. Thanks to Octarine Engine services for pointing that out.

So, that's what it looked like for both sides.

The RH side was probably the most difficult as the battery  box and wires all impeded a good heavy swing of the trusty claw hammer. After more ( incorrect ) dousing of WD40 they ( LH & RH front spring bolts, RH drop link) still would not budge. Obvious.......................bigger hammer.

Off to brother in laws for lump/club hammer. Still no joy and still more dousing with WD40.

By this time better weather was upon us so I was going to devote a whole weekend to the jobs to do.

Besides I was itching to get the new stuff on.

Come the weekend the first job was to locate the live feed wire to the fuel pump and the earth. Their are four wires, all dirty black-ish plus a couple of dangley earth wires. I did many years ago label the wires but the elements worked their magic to make them useless. Still I'm a clever git sometimes and I've even got a multimeter ( £2.99 from Wilko's- only the best for me...hehe) and wiring diagram, so I should be able to work out the wire feed & earth. No.No.No. Even with battery connected there was no current flowing with the ignition turned on. Now here is the start of another story not yet told.....................the car immobiliser, fitted circa 1978-ish with sh** loads of red wires under the LH dash + secret on/off switch under RH dash. Methinks these have an effect on the current flowing but I'm not that much of a clever git to understand that load of spaghetti.

So we'll leave that for when I attempt the electrics proper.

For now all I wanted to know is which wire and does the fuel pump work ? I settled for the does the pump work ?

Simple answer..........................No. Rats rats and more rats. Even the recommended tap on the side didn't do the trick. I left it a day to re-think.  Moved on to more nut bashing with the lump hammer. Still no joy. The LH spring mounting bracket had taken a few hits and was beginning to bend inwards. Time for some more thinking and formulating.

BBS webring and MG forum gave the answers. Loads of em. varying from use a "sawzall" ( From the U.S bless em, they mean a reciprocating linear saw blade, i.e jigsaw or power blade ) to cut the bolt heads off, to drill through the bolt ends each side. I opted for Octarines method. Use a thin grinding disc and grind up between the spring and bracket through the bolt each side. It worked a treat. Marmalised the end of the spring a little but ,hey its off and usable.

here's proof................and them bloomin bee's are back.

The spring has had a good clean up with the wire thingy in the angle grinder. Looks almost new. Gave it a liberal soaking in thin oil and cling film wrapped it till I'm ready for the next bit.

As of yet I've not tackled the other spring removal. This is only because today ( Saturday) I forgot to buy a new thin grinding disc and I'm working most of the weekend in the pub. I chilled out and caught some rays in the garden. Uni has been manic, with a 6 week placement just ended, one exam the first week,1st day back. Essay to do + another exam + Dissertation proposal hand in.

What I did do a few weeks back is :-

All the parts holding the axle were wire brushed clean using the angle grinder then primered ready for a nice coat of black paint. Top shows the spring and tools I used for the rubber bush removal. Its a composite bush inside the end. As you can see I had to destroy it to get it out. I think destroy is a little understatement. It was rusted solid and no way was it going to shift. Even if I had a press of 100 tonnes, i doubted it would have moved. The Bush is a thin outer of tough steel, a thick rubber inner then another thin steel  inner. The offending bolt that would not come out was stuck to this surface. Its the rubber that causes all the problems. It does its job and resists and dampens any forces applied. I drilled several holes through the ruber and chisseled down the outer shell pushing it inwards as I went on. I bet the fitting of a new one will be even tougher. Which reminds me. I don't have a replacement. Thats why I'm working all weekend, I will need two, plus bolts/nuts and the rubber bump-stop pedestal. Mine disintegrated when the original "U" bolts came off. Anyways. Up until yeaterday I was also convinced I needed a new fuel pump. I tried several times time connect it and make it work.Stripped it down, cleaned it and the contacts, but to no avail. Not even a murmur. So, I checked You-Tube, John Twist of University motors again. These are wonderful clips from an MG man through and through. The clips show all the tricky probs and remedies for loads of mg makes. Tiz a pity its no longer in business.

This time I cleaned the testing wires thoroughly and the battery terminals. Rechecked and cleaned the points with emery and Bingo........................buzzzzbuzzzzzzbuzzzzzz. It now works a treat. So, since I have a day off from Uni Monday I'm ordering said parts + paint and next weekend will see me remove rear spring, clean it up, paint parts black, remove some ( lots) crud from axle, fit RH armstrong damper ( thats how I removed RH lever arm - with damper in situ and attacked on the bench- easy peasy) fit fuel tank and hopefully Sunday fit spring and new parts. If I can re-fit new front bushes. This is going to be a drama, I can feel it already !

Just to prove the car and project is politically correct and in line with all green issues I'm recycling as much of the car as possible. I've used the old doorskin for most of the patch panels on the rear and will be using it again for the door slider bracket. These have rusted badly and needed removal when I replaced the doorskins. I kept one to use as a template. They are handed too, so I made a paper template. 

Look !                                                                                                                                                                

More soon folks !

Let It Snow, eh ! .........yer want more ?

So we did have a white christmas after all. I can't honestly remember when the last one was but probably over 25 years ago. Well properly anyway. Most of the snow in the last decade has been of the very wet slushy type gone after a tiny rainfall. It still manages to disrupt things thought on almost biblical proportions. Why in the UK are we so unprepared for snow in winter, heatwaves-ish in summer, rain in autumn and insects in spring ?

         Enough winges. Christmas was good (In an overindulging kind of way ) but bad for the MG. It must feel unloved and neglected, abandoned and cold over the last few months. All I've done is repair the vynyl cover and make the rear window a mesh of duck tape. After a particularly rainy, nay torrent of a downpours for a few days I noticed the rain had collected to such an extent the cover had sagged right into the spare wheel area holding about 30 gallons of water. Some expert juggling and inexperienced manipulation saw only a little spilled inside. It did happen again but not on such a grand scale so thats when I hit on the idea of how to support the cover over the gentle slope of the rear window. It may look like the base of a well upholstered seat base but its doing its job under all that snow. I do hope my worse fears of a radiator leak is not apparent after all the freezing temperatures. Its funny how you get good intentions ( I thought of this mid repair to the rear window duck tape episode) "don't forget to empty the coolant before it gets too cold". Did I ?. well you should know the answer to that by now ( NO)
Hopefully I'll be lucky ( Never) or just completely forget come spring. 
      Any further musings car related have been regarding the colour. I think its going to be an off shade of white......................maybe. I just scared rust bubbles will show through after the expensive respray. Some slight (very slight at last look) surface rust is showing on gutter seams over the primer. Gawd knows what its like come warmer weather.  Uni/work keeps me from other thoughts, and of course the wife and kids are high maintenance at this time of year. I'll keep checking the lottery though .

I'm still here...........honest !

So as the title says I'm as committed as ever to get the MG done, its just that I aint had the cash or fortitude to work in wind, snow & Ice out on the drive lately.
The last job I did was to partially remove the rear springs. The Axles free, that was easy peasy. The rear spring mountings were easy too. The front mountings won't budge. Despite several soakings during the Autumn in petetrating fluid the bolt will not knock out. Neither will one drop link too ??.
Fairly easy to solve though......................borrow a bigger hammer ( from B in L )
 So thats how the car has stayed for the last couple of months. Under its shiney silver Argos cover.  Actuallythe cover is not so good as I first thought. During some very windy days it ripped along its supposedly "welded" seams. Easily cured with a stapler and duck tape. Methinks the recent snow will preclude some more duck tape though.
Work/Placement and Uni has taken most of my time the last couple of months, that and dreaming of money.
I have worked a little, as student ambassador on open days and after christmas as barman in my local Saturday nights.
Uni is getting very intense with the following months requiring three essays and a poster plus another 12 weeks of Placement.
Roll on Summer.........................and I aint even started on the Christmas food and drink yet !