Back to Black..........hopefully not

Well, technically black is not a colour, but it is for the purposes of my vehicles previous owner is must have been a very attractive and desirable colour.
I say this because I spent the best part of four hours removing some/most of the stuff liberally covering anything remotely not chrome plated in the engine bay.

Lets start at the beginning of this topic though.
The cylinder head is on and looks, well..............not like it did before.
Before everything in the engine bay was either dark oily greasy black or covered in "horsehair" fluff from the shedding of the under bonnet lid protection.
Actually everything was covered in both. So thats why the cylinder head now looks like a cylinder head. Albeit still has some small corners still holding onto the black paint applied at some stage. The Ally intake manifold was the same. This however could take a lot more aggresion being lighter than the C.H.

The carbs were next on the list for re-furb. They looked awfully dark and "fluffy".
Trouble was meths,white spirit, petrol & thinners didn't touch them.
A trip to the local boy racers heaven ( Motor Factors, full of wheels,graphic equilisers, polish and LED lights ) and a large spray can of "Carb Cleaner" purchased, together with spray on engine de-greaser.

Well they both worked a treat and did exactly what they said on the tin.
The carbs look .................well again almost new. I enjoyed cleaning the carbs. I sat down the drive under the shade of a tree, jacksy parked on nice plastic chair with all stuff laid our before me on old pinic table. What joys !.
I even managed to find an old battery powered toothbrush for the fiddly corners of the carb.
The engine de-greaser was a little scary as it stated rinse off with water.
I'd just covered the entire LH side of the engine and chassis frame.
However, I bit the bullit and sprayed with high powered cold water and guess what, it works. No more smelly, oily, fluffy engine.
To prove a point on the progress here's a before and after .........look up

( for some reason I still can't reposition the photos where i want them...come on Blogger, sort it!!!! )
Lots of the ancillaries have been cleaned too. My point about the black is that at some stage in its early life the car had had a good and thorough ( mild understatement) respray from white to black. This included the inside of all the boot,door, bonnet, sills, engine bay and ancillaries including THE WIRING.
So it took me four hours of back breaking cleaning the wires with thinners to reveal the colour before I could connect up the various ancillaries. Plus the sticky and grimy black electrical tape binding so many wires.

What lets the whole thing down is the area where the large smiths heater sits. It looks a little rusty and still white in parts. I didn't think they would remove this when converting the colour since it took me best part of 2 days to remove.

Next post will reveal what I found hiding in the car from Mr Bodgit & Scarper, or was it Mulder from the X-files ? .................more soon !

Now I've published the post the pictures don't do it justice. I'll try to give a better before and after of the carbs..............promise. And, And ,And what colour should I spray it ?

My feelings say Carmine Red, wifey wants old English white ( Original colour) kids say pearlescent light Blue...........................tell me what you think !!!!!!!!!!!!!!please