Wednesday, March 28, 2007

Never in the field of human indifference has so much...

Well...........I did do something that lifeless Saturday afternoon.After lunch I summoned much steely resolve to keep going and get the project going.
That's despite feeling tired and a little snuffly.
So, out with the mig and rest of tackle from MG bootspace.
Cutting cardboard templates, jigsaw buzzing, grinder scary grinding, clamps, drilling holes and finally welding. Hey,....it looks OK. My weldings getting better.
The end part of the sill needed closing in the rear wheel arch looking forward.
I've been putting it off for ages but now with mammoth effort and not a little skill..its DONE.
So just to prove it and the attempt at the rear wing attaching edge from last time
See below.............................
















The left hand photo shows the cover plate welded over the sill end plate. Just like the perfect Mr Evans showed us. Even "puddle welded" onto the correct vertical flaps too.
The right hand photo probably looks worse that it actually is since I took the photo in the dark.
I think I said a few posts ago I'm resorting to using .................body filler......sin of sins
A few ( bugger, the formatting won't remove...please excuse the font and colour)
deft whacks with the planishing hammer and It'll be perfik.
I did suffer later on in the day a it was apparent I was suffering from a stonking cold so I laid low for a few hours. Addendum. lying alert. I did have the Mon and Tues off work due to sneezing and severe "man Flu".
Did manage to purchase a brand new door skin on good ole E-bay though, and quite near by.
Collected it last night and its loverly.......little things and all that smirks the wifey.
Had a good look at the sellers MG and its spurred me on a little. Thanks Andy.
Please don't laugh too much when you see my repairs......yours looks perfect .
So, since wifey's away again this weekend and if the weathers OK looks like I'll be repairing the door and fitting the door skin.............maybe.

Oh for the wings,........the wings of a ( MGB GT 1977 Passenger side rear) !



Saturday, March 24, 2007

When enthusiasm flies........part II

Yes its true, I'm almost becoming one of the fabled "unfinished Project for sale" mob.
The sad delusional mid life crisis type of bloke who thinks ***k it ! ,I don't need this aggro in my time of life.
After a long hard week on the road and more than one hotel I went to bed Friday night full of anticipation for the day ahead. Wifey was going out early off to London with her arty farty college chums, both kids had plans away from the house most of the day, so no ferrying around to do.
So, up early Saturday morning. Lovely cooked b'fast of cheesey beans, bacon and eggs and toast. Tidy up kitchen, fetch papers and chivvy kids into action.
It was only then I noticed the weather. Not raining for once, not even howling a gale windy so outside I went to remove the cover.
Brrrrrrrrrr its a little colder than it looks and with several icy gusts.
Looked at the rear sill/ inner/outer wheel arch that needs a finishing plate welding on to make the job complete.
Then It hit me............I just can't be bothered. Jigsaw cutting, hole drilling, grinding, fettling and welding....................................Its not quite mid-day so as a diversion I wrote this post in a fit of indifference. I guess I'm feeling rather tired from the travelling all week. Cambridge, Brighton, Havant, Portsmouth, Slough, Mansfield. Plus college piles on homework in a last ditch attempt to make sure they have been teaching us the correct topics at the correct level all year.
Not even a full Saturday of footy since England are playing Israel in the Euro qualifier.
So my moods rather depressed today.
Never mind, I'll do what I always do in a situation like this, .............nothing.
OK maybe I'll edit all the typos on the other posts then.
Hope the weather improves for tomorrow though.

Sunday, March 18, 2007

Rust......a show and tell story

The above shows a close up of the rear quarter. Mine has no rear wing attached at all. It was
cut off for some reason by the P.O ( Previous owner)
So you can clearly see the rust and flimsy edge at which the/a ( I ain't got a new wing yet) wing should be welded/glued/magically attracted/brazed/blu-tacked/gaffer taped/screwed/nuclear fusion.
I say this because I've taken council on how to fit the wing. One source says weld the part hidden by the chrome window surround from the outside, then weld the rear very difficult bit by trial and error.
Another source say send it to us and we'll do it for about £1000 per side, its very tricky you know and we are the **OC, we know best, we are smug and we'll charge you a fortune you skint and clueless little oik!
The absolute god and Mr wonderful, the saintly and sanguine Mark Evans ( and the bloke from Stoke) says glue them on and use the odd few tack welds at easy places.
Anyway........its still fairly irrelevant as I have no date or timescale to fix the wing on because..................................I don't have one !!!!!

In anticipation of this though I did set to work repairing this rusty edge. I have cut out three sections with trusty angle grinder. Made up one tricky repair section from flat sheet and welded another small part onto that. Please bear in mind I have now elected to use body filler to "shall we say".... enhance.... the appearance of the repairs.
I must stress that in no way is the structural integrity being compromised, only my delusional ideas of being a master M.I.G welder.

Next post will show my repairs of said area. Really, I did do it all myself. I must have, 'cause who else would own up to it ?

Bit short on witticisms this week. No one's fault really. I've been busy with work and college.
Kids same. Wifey also. Wintry weather and all that.

Sunday, March 04, 2007

Back to Normal.....vehicle wise that is

I forgot on the last post.


The Ford Ka has gone and I have my trusty old ( brand new )Avensis back.
I was just beginning to settle for the gross inconvenience of 2 doors, no remote locking, no hands free kit, no power on hills, no CD player, no satnav.
So Thursday I made it to the repairers late on. Waited say 10 mins for the said charriot to turn up. Lo and behold up it comes all shiney and newly resaprayed and valeted.
3 mins to load up with a salesman's lot and then get in and drive home.
Bliss......sheer bliss. How large the inside is. How quiet the engine, how powerful.
How clean and nice smelling. How comfortable. Music I can hear, a heater fan I can't.
It feels good. I'm not one for knocking cars especially my fave company car was a Ford but the Ford Ka is ( for high mileage driving ) ..................Pants.

All's well that ends well.......if it ever ends !


Not much has happened lately MG wise. To be honest the weather has been rubbish and my work life has been a bit up and down to say the least.
My sales area has increased to cover at least half of the UK, the half being the eastern half including London (inner and outer) and a strange place I've never heard of called Kent.
So it looks as thought my future is secure at least for the next six months even if it means more nights away from home.
The photo shows the repairs to the base of the windscreen and A post top. This is a very complex area to repair made even more difficult by the fact that I had no idea how it should look. The side was a big hole before I started and the other door/side is even worse.
How lucky for me its covered up by the wing and windscreen rubber........ eventually.
Solved the issue of the laptop.........I've got a new one !!!!. well another one at least which was a colleagues who has now left ( Bye Keef with the lovely teef ) I have also inherited half of his sales area too. Cor blimey, talk about vultures hoverin'.
The camera issue with the faulty cable has also been solved. Wife'y and I went to the local Jessops where we bought the Nikon Camera. However neither of us could remember the Model. No problem said the smooth as silk salesman, what you want is a card reader, its the same price and has the advantage of....... blah blah blah. Sold to the clueless couple for £14.99.
But, it works and its great. Now we can organise all the things we've lost digitally somewhere.
Still desperately short of funds for the project, short of good weather at weekends,
short of patience with teenage son no 1, short of ideas, short of skill panel beating, short on love and affection..............phew!! nearly burst into emotional outpouring there.
Get back to reality man.
So, almost finished one side of the car, except door and rear wing ( which I think is on the birthday prezzie list to wifey ( She's asked where they are bought from, so lookin' good )
My time has been take up by MG dreaming. What colour should I have it resprayed.
I'm thinking maybe Carmine Red with Black interior. Or Black as is now. Trouble is Black shows up any and every imperfection. For sure I'll fit an Club spoiler. I'm even thinking of lowering the suspension ( remember its a rubber bumper model which rides 1 - 1/2" higher) and converting it to a chrome bumper model ( extra £400 quid or so )
Answers on a post card please.

Sunday, February 04, 2007

Weld a go go.......and stop stop

Look folks progress..............i think
The view shows the rotten windscreen surround in the corner. The corner is a polite way ( a British Leyland polite way) of understating the rust problem and location . Its several panels, all nicely curved and spot welded in strict order rendering them virtually un-restorable.
However, not to be put off ( well I had actually for the last six months at least ) I tackled it with the usual how the hell do i do that and where do I start ?
Well after about 3 hours looking and generally doing lots of butch posturing and tidying up I made a start. It is tough. I spent all day welding in tiny bits and grinding them down.
The last job of the day was to fill in a tiny pinhole left in the outer frame where I inserted a tiny patch. So thus the stop-stop. The welding just blew holes bigger and bigger till I had to insert another patch the size of a dinner plate ( exaggeration alert.....50p size really)
Still wazzed me off though last job of the day, getting dark and cold. Cut many pieces and welded/ground down/re-welded/ground/ last little weld to fill pinhole/re-patch, mark out,cut,grind,fit/weld grind.
So in the real world the twins continue to hate each other with a vengeance. Wifey's still head down into three art assignments each weekend and day light hour midweek.
I'm confused as ever with the political and financial manoeuvring at head office in Paris and Slough. Hee Hee......how I think its funny to mention these two cities in the same sentence.
Can I remind any one who reads this who is a sales man/woman who uses the motorway frequently,don't buy or hire/lease a ford Ka
Since my Toyota Avensis is in for re-shaping the courtesy car is absolutely PANTS.
Roll on mid Feb when work things get back to almost normal.
ADDENDUM..Wifey did not buy or get a new cable for the family camera. I used my company Agfa ( which is again PANTS) but at least its USB cable works, hence the rubbish photo.
Next job is to finish off repair with yet more tiny pieces welded in and yes.......................sin of all sins I'm going to use body filler to make it all smooth.
Then move to rear of car to tackle the outer of the inner wing, then the outer wing itself.
Then believe it or not the whole of one side is complete ( Body work wise that is) except for the door and front wing which need new skin and replacement lower patch respectively.
More soon.

Tuesday, January 30, 2007

And Boy did it bite my arse

Greetings peeps................Have to sound cheery as I'm as pi***d off as hell.
The last post really did bite me on the a**e.
I nearly died a very flat squashy death. More of that later.
How's that for fate, Karma, bad vibes , ying yang, blasphemy or just plain tough titty.
There must be someone/thing/external joke player up/out/about playing some rather cruel and unfunny tricks with my life.
How I wish I'd not made the last post.............07 stinks.
I'm trying the same trick as the last post, irony and and a sense of belief in my own fate !!
Nothing much has happened MG wise.
Welded hole in floor near rear spring hanger.
Bought 2 tins of Grey etch primer.
Even collected MG roof section from Langley and deposited it at factory in Slough.
Its actually resting in a very rusty old garage out back of the toolroom, surrounded by
years of accumulated scrap machinery and 200 year old compressor.
The boss don't know its there yet. I'm have to tell him soon. Maybe he will guess when I sneak out of the next sales meeting at lunchtime and proceed to wield the grinder.
................................Oh whilst I remember......I was very nearly crushed to death by a HGV in the winds the other Thursday it's that 07 thing again !!!!!!!!!!!!!!
Yes it was really that close. Here's how it happened.
As I was wendling my way from Scotland I stopped at Castleford services to re-route my way home. The winds were getting very strong and good old Sally Traffic was giving out a list as long as yer arm of roads and motorways closed. Most of them between me and home.
Off onto the A19 from the A1 south of said services and I met a long queue of stationary traffic.
The A19 at this point is actually a minor B road, but very long and straight and very exposed in flat countryside. After 30 minutes wait in long queue orange lights appeared from the distance. Two recovery trucks were attending to a HGV that had toppled over, about 300 yards ahead on my side of the road. So, to cut a long story short. they recovered the HGV ( well I say HGV, it was actually a big removals type van transporting mattresses )
The recovery truck with HGV in tow sped towards us at about 60 mph.
Then Sh***********************t It started to fall over about 10 yards in front of me.
Its back end hit the transit van in front of me, it kept falling and I ducked down and sideways.
Smash, boom, thud, thwack. It hit me on the windscreen pillar, windscreen, roof, door front & back and bootlid.
It then went on to hit the transit van behind me ( On the roof only) and came to a standstill at 45 degrees to the HGV behind that van.
Bear in mind we were all stationary waiting for the go-ahead from somewhere down the road.
I think if I'd not been between two transit vans ( hi line ones at that) 07 would have been a very very bad year for at least three more people.
I dare not tempt fate again...so I'll sign off with a note of pessimism tha......

Hold on did...... I get my sums wrong? is it odds that are bad for me ? maybe evens then ?
or are they good. Maybe at the autumnal equinox it changes expotentially ?
There job done Not called "Captain chaos" for nothing.
I'll keep hangin in there, at least till the jobs done anyway. ( go away italics....please)
I do promise to post more often though...and if said female gets her finger out even post pictures.

See yer soon............p.s keep the messages coming I need cheering up !









Sunday, January 07, 2007

Happy New Year....................Its an odd one

Happy new year to all my fans and avid followers of nothing in particular.
The odd bit refers to the year number 07.
Traditionally for us ( me actually) odd number years seem to treat me better than even ones.

Before I get into this too deep.

Congratulations Hayley and Matt...........A lovely new little girl Daisy

So the year dawns bright and new, if not a little windy and wet.
Christmas was good, the house full of food and booze, family and friends, mess and arguments, indigestion and late rising, shopping and spending.
So fairly normal then.
I did get several invites to parties over the festivities which were all very good. So good in fact that i even turned one down, very near home and on a Saturday night. Wifey and daughter went though and enjoyed it immensely.
One sad note was that the rear wing never appeared as a Christmas present though.
However, a fantastic Red MG Keyfob did appear ( thanks Han) and a rather expensive looking travel bag with subtle embroidered MG logo on the side.
The MG has been rather neglected of late since the fitting of the sill section.
As you may be aware of the sill fit is not actually perfect. I think the gap is too large.
I've spent a lot of time thinking about this as a precursor to know what to do next.
Now I'm of the opinion that the door needs better alignment. Its been on and off many times and is a swine to tighten up.
The sill gap is probably 8-10 mm when it should be 3-5mm. The problem is twofold -:
The sill will not move up any higher as the A post prevents this, it and has to be welded together to give some rigidity.
The door catch at the B post seems very high as the door has to be lifted to be closed.
Not having the rear wing in position to give the B post some strength don't help.

So the upshot is I will reposition the door by dropping whole door down approx 5mm.
Re align the door catch on the B post, hopefully it will drop down enough.

This is all better done once I have a new rear wing welded in position ( Hope wifey's reading)
Before this though, the inner/outer wheel arch must be completed.
I have started this and welded the inner strengthener plate onto the end of the open ended sills. The wheel arch sections are welded on top of this to align with the outer wing wheel arch.
So, cash needed for the inner wheel arch section/s. Luckily repair panels and not the whole arch can be purchased from MGBhive/MGOC. The rear wing bit is about £57 and not £350 as first thought. .......................... I told you 07 is lucky for me.

As I started to say for me and the family odd numbered years seem to be very good. Or is it that the even number years have always been bad.
I broke my leg in 04........................................Bad
Born in 57..........................................................Good
Heart attack in 96.............................................Bad
Married in 89.....................................................Good...........( brains with tact)
Redundant in 2002............................................Bad
6 month holiday/work in USA in 2001..........Good
Twins born in 96..................................................Good at first, but 13 years later maybe bad!!

Anyway, you get the picture. 2007 good year. Hope this statement don't come back to bite me on the ar**.

Back to the resto. Yesterday I welded a small repair patch in the front wing/ bonnet gutter.
Re-welded the sill in places. Sprayed primer on all the other sill areas that were showing surface rust from welding.
Noticed the windscreen bottom/rubber gutter rust hole that's going to be a dogs d*** to cut out and repair. Looked into hole in passenger rear floor. Stood around lots and pondered.

Other breaking news is I still have to collect the roof section from a nice chap in Slough.
I turned up 3 weeks ago and for some strange reason thought it might fit into the rep mobile.
Not a hope. Not even into an estate car. So I have to borrow estate car with roof bars to transport it to works in Slough for storage/chopping up. This will be done next sales meeting early Jan. Promise Chris. Thanks for your patience.

Must concentrate on removing and storing engine/ancillary parts till cash flows.
See you all soon. P.S Wifey's not yet replaced camera cable so no pictures as yet.

Sunday, November 26, 2006

Not just a metaphoric gap ............?

How profound of of me. Sometimes I amaze myself and other people too !.
The gap in question refers to two things. Firstly the blog and photographs out of synch and the gaps in the restoration story.
The second is the gap in the sill end plate now I've attached the outer cover sill.
As you are all aware my laptop has been giving me grief ( a lot actually) as the photographs would not download, the Bloggers website just froze usually threequarters of the way down a newly created post. Or the laptop just switched itself off without rhyme or reason.
Good news. After a bit of wheeling and dealing I'm ( we also, as the whole family benefits)
the proud owner of a BT home hub. This means the ancient but reliable PC can also be connected to the broadband. The Laptop issue will have to be resolved at work after the crisis of new management is primed.
It transpires the cable of the Nikon camera is to blame for the photo errors.
It fried the laptop and the PC's USB connections. Repaired for £45 quid and now we're cookin on gas as they say.
Back to the restoration though.
The castle rail sill is on. Welded like no other. Gone a bit overboard actually but what the hell.
Spent ages fettling the inner membrane sill and drilling about 30 five mm holes for plug welds.
The plug welds were a swine. It took me about seven weak and crap welds before I realised
that maybe eight mm holes are better. Typical fufferfour. Do the job again but this time much better. Spent even longer offering up the outer sill after hours grinding down all the plug and seam welds done. All this took place throughout October when the weather was good each weekend. Now I'm rushing a little to get the sill complete before the rain starts every weekend. But, the cover sill was welded on, on the top seam last week, and today I completed the rest of the welding on the sill. I even repaired the "A" Post hole with a nicely fitting patch. The sill end cover was welded on at the rear.

To keep it interesting here is a picture of the sill during a trial fit.


NOTE.... the hi-tech shovel holding the outer sill and wing bottom in place!!!!.................
Well it was the only thing that fitted at the time.

Pity the gap under the door though. Its about eight to ten mm. There was no way it could be any less. I'm hoping the door ( which has been on and off several times) is aligned poorly.
If not another job for the welder when its doorskin time. Once everloving wifey has purchased said cable for the ( her ) Camera I'll post the photo's of my handiwork so far.
The next jobs are :- Hole in floor near spring hanger. Cut away. grind. fit patch and weld.
Gutter section on front wing/bonnet side gutter. same as above.
Then yipee.........................weld or glue on rear outer wing ( wifey's buying it me for christmas)
Be patient folks......................................its getting there.

Saturday, October 21, 2006

Moving forward.......... i think !


Again I'm suffering from laptop freezing. Three times I wrote this over the last week, only to suffer the cruelest of practical jokes from my friend the laptop.
On each occasion I'd posted two pictures and typed at least 300 words when it happened. Sad pity is it is all lost as I have to switch off and re-boot losing everything. So I'm typing this in three sections and posting as I go.
Bloody typical though, the last three posts/attempts were witty and interesting. Now I'm tired and its late and feeling melancholy.
But.............I have a glass of wine ( a big bottle even) so here goes.
The sill's are completely removed...........Hurrah.
Lots of rusty stuff has been painted with Hammerite rust killer.
The front footwell is all welded up.
The " trumpet" is repaired . No please don't laugh. That is its correct name.
The new sill's have been painted in anticipation.
Smelly red oxide paint has been sprayed everywhere I could think of before the aerosol ran out.
........................Oh I almost forgot. I repaired the gaping hole in the side footwell. Just to prove it here's the before and after pics. Look closely you can even see the welding too.


Sorry....lost photo in a fit of spellchecking & tidying up!
Grrrr (counts to ten slowly)...............that's the EIGHTH time I've lost a post

And now some other news from the world of Fufferfour

The bathroom is finally finished. And very nice it looks too !
I spent all day Saturday pasting and hanging wallpaper, fitting carpet trim, Laying vinyl in cubbyhole, tidying up and putting thing away, refitting all fittings taken down to wallpaper ( including Medicine cabinet & contents ) and washing the venetian blind blinds. By the way our medicine cabinet is fully equipped for a thermo nuclear war thanks to the ever loving wife.
Lost an arm sir ? No problem. Paul...pass me the thermal lance
Suffering from a headache ?......easy, we got Aspirin,Cocodamol,junior asprin,dicocodamol,asprinamol,Ibroprofen,disprin,paracetamol,paracetamol max, paracetemolmax+,calpol liquid, calpol night time, calpol daytime non-drowsy,nurofen. nurofen max,nurofen max with vanilla ( or rasberry) migralieve light. Migralieve heavy and finally Migralieve ........or course max.
Slight cut or gaping wound ? we got steristrips standard, steristrip extra long, 38 boxes of assorted waterproof plasters, 17 boxes of junior plasters, 10 pieces of cut to desired size plasters, red plasters with teddy bears, blue plasters ( just in case the environmental health call in the midst of food preparation) and crepe bandages, long, short, wide and rectangular. Even one smelling strongly of Ralgex ( lets not go there, its mine and I know where its been)
Well you get the picture by now I'm sure.
Now I've finally settled down and resigned to the fact of life that me and computers will never be an easy mix I can get on and concentrate on the more important things in life.
See you all soon for the next installment.

Thursday, September 07, 2006

Lets try again




Still "issues" with laptop and strangely enough the letter S. Its sticky.
Suspect kids somehow.

Above are the photo's I missed on the last post.

Good job I struggled with the photo's yesterday, as last night I did some welding.
CR*P..............its the only word to describe it.
Well it was dark and I did rush things a bit. It got dark because I spent too long "modifying" my B&D jigsaw to work like the powersaw I used a college.
I'll have to spend time making square holes now and save the welding for a long weekend.
More soon...............if the welding improves.

Tuesday, September 05, 2006

Its off, and no turning back

Apologies for the delay in posting any news and events over the last few months.
Its been a very busy time with work, holidays, sunshine and family getting most of my attention. I'll have to be brief here too as my laptop keeps freezing up.
Three times I've posted wit and wisdom today only for it to be lost in cyberspace.
The title refers to the castle rail sill section finally off at last. Albeit in about seventy small pieces. It was achieved with brute force and ignorance and then a little intelligence and maturity.
After being stumped for so long on how the section was attached to the underside of the floor I decided to use the brush attachment in the drill and clean the inside sill bit.
Lo and behold.............semblances of spotwelds. Trouble is I buggered up the spotweld drill trying to sharpen it with the angle grinder. So hence the brute force and ignorance bit with a bolster chisel and medium claw hammer.
I eventually bought a new spot weld brill bit and here's a story to tell of the ordeal.
I was in Sheffield one midday between customer visits. A town I know well as I was born and bred there. I thought since I'm in the east end ( the grimy Industrial part full of every type of factory and service industry) I'll buy a drill bit.
Well..................................What a performance. I must have visited eight tool hire shops/engineers supplies/cutting tool specialists/tool shops and not one had one.
Well. actually Cromwell tools did but not the type I wanted. I bought it any way.
Some shops had no idea what a spot weld brill bit was !!! In Sheffield of all places. The home of steel and steel processing. The land of welding sheets and machining, railway parts and Iraq gun barrel's, inventor of stainless steel, cutlery and nickel plating and all things engineering.
I used said drill bit and it worked a treat. It was still hard work upside down drilling at only half arms length, hair and eyes, face and mouth full of tiny MG particles. Even the sunshine made it difficult as I had to lay flat face up half looking at the dark/black sill half looking into bright sky. Still the key to it was :-
a/. clean the surface thououghly before starting
b/. use the correct tools
c/. Don't give up, its often easier than you imagine
The photo shows the sills with a good view of the large hole I cut out ready to repair with the MIG welder.

Yes........................I'm sorry I should have told you earlier. I bought it on E-bay ( again)
for £60 and it works a treat. The guy even threw in a large sheet of 1mm thick steel too.
I'm currently scheming on how to buy an Auto-helmet.
.
.
.

.guffaw & snigger............................Its that word and my base sense of humor.
Anyways. I have to repair the small holes in the footwell and front footwell fascia before attempting the sills. It will be a good opportunity to practice welding in less critical areas.
By the way I have a huge repair section for the cut away area and the inside floor from the nice chap in Doncaster where I bought the sills ( E-bay yet again)

I promise I will report more often from now on especially since I'm likely to become more frustrated with welding.

FYI had a good hol in Spain with the extended family ( In-laws) several trips abroad with work like France and Sweden and France again.
Mini holiday in Belgium for the wifeys 50th ( weird people but fun place) but not seen Chris much due to hol overlap so will get humour injection on Friday night out this Friday...yipee.

Monday, June 19, 2006

My problem is this..........






That's how I ended the last section of my blog ( see below)
Apologies for that. I was waylaid/distracted/thinking of money/beer/ etc

Here's a lovely photo of me enjoying myself on Fathering Sunday.
I spent all morning looking at the sill and thinking how the hell do I remove it ?
It appears to be welded by magic.
I've drilled all the spotwelds I can see. I've even drilled some I can't see just for good measure.
What I meant to say at the end of the last blog is the vertical sill is behind the "A" post and between two other vertical parts, and at the B post, disappears altogether in a void of important structural looking parts. I do what I normally do in situations like this: look at it for lots, make a cup of tea and look at the restoration bible from Mr Porter.
I did glean some useful info. The new rear part of the sill can be welded on top of the tabs for the old one. And I managed to remove ( or most of) the offending sill part.
The really annoying thing is though, the castle rail is still there. I cannot see for the life of me how its held in position. Its stuck like glue, even welded solid, but where ?
The Previous owner had the castle rail cut down the centre and left the inside bit there, just welded a new one onto it. No wonder it took so long to get it off.
I was amazed when I'd spent 3 weeks grinding the bead welds, removing underseal and being frightened to death of the grinding wheel only to find half of another one there. Only this time it looks a little more permanent.
After consulting all the text books and internet pages, still no sign of how to remove them.
I find this so annoying that pages and pages are written about this subject and not one explains the procedure or difficulties of removing sills.
They all say " remove sills. careful their sharp..................Thanks a lot mate

How ? where do you start ? whats the most critical bit? whats the trickiest?

Enough said. More when I've calmed down.